10 Easy Ways To Mount Your Window Hardware Without Breaking A Sweat

Mounting instructions given along with the hardware, but to ensure the success of your installation, try to read as follows:

1 Since not all windows are level and plumb, you must take steps down from the ceiling where you plan to set up your hardware.

2 To ensure that all carriers mounted evenly on a similar level, take your trusty retractable steel measuring tape.

3 Mark the exact spot where the brackets will be mounted using erasable pencil.

4 You can install the hardware in the following order:

Initially, the beams go up following the movement of the rings placed on the rods or poles using a stick with a half-rings. After that, you must insert a stick or pole in brackets, and then put the finials on the ends. Finally, you can add your own window treatment in slices.

Place the pole and a stick up his sleeve before putting the rod through the brackets when using a half-sticks that go with rod sleeve. Finally, you can cap finials on the ends if necessary.

5 To find the wall studs, use the stud finder. It provides a secure anchor for hardware maintenance.

6 Why not try with Molly bolts when installing brackets in the dry wall or plaster? They give you all the hardware items in place as it expands inside the wall.

7 Use masonry screws that can also extend the installation of concrete or brick.

8 Take measurements of your window frame and pencil mark the bracket mounting holes in the rod to the ceiling. Gravity will work against the pole or rod, so you have to use Molly bolts safely install hardware.

9 To stick to avoid sagging, you have to put up a rail center when the stick is very long. When you create a treatment of heavy fabric, you still need to use additional brackets though your stick is short.

10 Always make sure that everything is safe when installing hardware. It is always the most important thing to consider when installing your hardware window.